How do you reset a Uniden base station?

How do you reset a Uniden base station?

How do you reset a Uniden base station?

How to Reset a Uniden Phone

  1. Press the “Menu” key. Scroll down to the “Deregistration” submenu and press the “OK” key.
  2. Return to the main menu. Press and hold the “Call” button and the “#” key for five seconds or more.
  3. Wait for “DEREGISTER HS” to appear on the screen.
  4. Place the handset on the Uniden phone base.

How do you reset a Uniden DECT Phone?

A: We suggest the following handset reset procedure.

  1. Disconnect the Battery.
  2. Press and Hold the Star and Pound key.
  3. Reconnect the battery while holding down both keys.
  4. Wait for the long beep.
  5. De-register and Re-register the handset, if this doesn’t resolve the issue.
  6. Clear the memory of the handset.

How do I reset my Uniden DECT 1735?

How to Reset a Uniden Cordless Phone Handset

  1. Remove the batteries. Turn the phone handset over.
  2. Enter the key code combination. Hold down the “#” and “*” keys at the same time, while re-inserting the batteries.
  3. Press the right-side menu button.
  4. Place the handset on the base.

How do I register my cordless phone to my base?

Press and hold HANDSET LOCATOR (or FIND HANDSET), located on the base, for about four seconds, until the IN USE light on the base turns on. Press # on the handset. It will first display Registering, followed by Registered.

How do I take my home phone off Do Not Disturb?

  1. Dial *78# on your home phone to activate the Do Not Disturb feature. When activated, callers hear “The party you called is not currently accepting calls. Please try again later.”
  2. Dial *79# to deactivate the feature when you are ready to receive calls.

Why is my Uniden phone not ringing?

There is no dial tone? Make sure the AC Adapter is plugged into the Base Unit and wall outlet. Disconnect the AC Adapter for a few minutes, and then reconnect it and ensure the power is turned on.

How do I setup my Uniden DECT 6.0 phone?

From the base:

  1. Press Menu and select Ans. Setup.
  2. Select Line 1 or Line 2, then select Record Greeting.
  3. Press Start. Wait for the system to say “Record greeting”, then begin your recording.
  4. When you’re finished, press Stop. The system plays back your new greeting.
  5. To keep this greeting, press Stop again.

Why is my cordless phone not working?

Check that all the phones in your home have been hung up. If you have no dial tone on your cordless phone, check the battery and charge it if it’s low. Make sure your cordless phone’s base unit is plugged into a working electrical outlet. Also make sure the phone cord is plugged securely into the wall phone jack.

How do I connect my router to my DECT phone?

Press and hold the “DECT” button on the router. After you hold the “DECT” button for a few seconds, the lights on the router will flash. The router is now pairing with the phone. When the phone finishes pairing, the phone screen will display the home screen.

How do you permanently disable Do Not Disturb on Iphone?

Settings. To disable Do Not Disturb from Settings, here is all you need to do. Hit the Settings icon on your home screen, select Do Not Disturb and toggle the option off.

How long does Uniden phone battery last?

about 1 to 2 years
The average battery life of a cordless telephone is about 1 to 2 years. For some cases it may not be able to charge up within a year.